Settings for the GK Pickup (GK Setup)
The Type of Settings
GK SETTING Settings
You can store three sets of settings in the
This conveniently allows you to prepare separate settings for a multiple number of guitars equipped with a GK pickup.
fig.0022
GK DIRECTION Setting
This sets the direction of the GK pickup's installation.
1.Rotate [GUITAR TYPE] to select “LP” (GK DIRECTION).
Set C
GKSetDIRECTIONB
GK PHASE
GKSetDIRECTIONA
GK S1/S2
GK PHASE
GK DIRECTION
GK SENS
GK S1/S2
GK PHASE
GK LEVEL
GK SENS
GK S1/S2
GK LEVEL
GK SENS
GK LEVEL
1.Rotate [GUITAR TYPE] to select “ST” (GK SETTING).
2.Press a MEMORY button
Memory button | Setting |
[1] | Set A |
|
|
[2] | Set B |
|
|
[3] | Set C |
|
|
2.Press the MEMORY button [1] or [2] to select the direction in which the pickup is attached.
Memory button | Setting |
[1]NORMAL
In this direction, the cable exits on the side of string 6.
[2]REVERSE
In this direction, the cable exits on the side of string 1.
fig.0030
NORMALREVERSE
string 6 string 1 | string 6 string 1 |
*There is no need to change the settings if you are making them for the first time or if you are not using multiple GK settings. In this case, select [1] Set A, the factory default setting.
*If it is difficult to determine the direction in which the GK pickup was installed on a GK compatible guitar, try it out initially at the [1] NORMAL setting.
If there is no response from the meter when you play string 6 during the GK SENS 6 settings (p. 13), but there is a response when you play string 1, change the setting to [2] REVERSE.
12
