E-37
5. PREPARATIONS
MONITOR
EDITSEARCH
FILTER
STATUS
SHUTTER
MENU
AUTO IRIS
BACK L
NORMAL
SPOT L
STRETCH
NORMAL
COMPRESS
FULL AUTO BLACK LOLUX
MODE
POWER
ON OFF
VTR
OPEN
VTR
CAM
13200K
5600K
5600K
5600K
ND
/
/
ND
2
.3
.4
18
1
64
CH-1
AUDIO INPUT
AUDIO SELECT
CH-2
CH-1 CH-2
FRONT
REAR
AUTO
MANUAL
AUDIO
LEVEL
CH-1 CH-2
PULL
OPEN
LCDBRIGHT DISPLAY
MENU
AUTO IRIS
BACK L
NORMAL
SPOT L
STRETCH
NORMAL
COMPRESS
FULL AUTO BLACK LOLUX
MODE
POWER
ON OFF
VTR
VTR
CAM
1.
Set the POWER switch to ON.
The unit turns on in Camera mode.
■The operation differs according to whether the unit is in the Camera mode or in the VTR mode.
When the MODE switch is pressed upward, the mode is changed.
The Camera indicator or VTR indicator comes on in accordance with the selected mode.
Mode
Camera mode
VTR mode
Operation
The GY-DV5000 enters the Camera mode. The camera image is displayed in the viewfinder
or on the LCD monitor. When a recordable videocassette is loaded, the GY-DV5000 enters
the record-standby mode automatically. “STBY” is displayed in the VTR operation mode
indication area of the LCD monitor or in the viewfinder. In this condition, press the VTR trigger
button to start recording.
*Playback is also possible in the Camera mode.
Playback operation becomes possible when the STOP button is pressed to set the VTR
operation mode indicator to indicate STOP.
The GY-DV5000 enters the VTR mode. The camera image will not be displayed in the
viewfinder or on the LCD monitor. When a videocassette is loaded, the GY-DV5000 enters
the stop mode.
“STOP” is displayed in the VTR operation mode indication area of the LCD monitor or in the
viewfinder.
DV input is possible through the DV terminal. (GY-DV5001 only)
5-1 Turning the Power ON
MODE
indicator
POWER
switch
MODE
switch
Turning the Power OFF
1.
Place the GY-DV5000 in the record-standby or STOP mode.
2.
Set the POWER switch to OFF.
3.
Remove the battery pack or the power supply to the DC IN connector. (When the camera is not going to be used for a longer
period.)
CAUTION:
●Do not set the POWER switch to OFF while recording is taking place.
Confirm that the STBY or STOP indication is shown in the VTR operation mode indication area before the power is turned
off.
Should the POWER switch accidentally be set to OFF during a recording, wait at least 5 seconds before turning the power
on again.
●Always set the POWER switch to OFF before disconnecting the power supply
Do not turn the battery pack or AC power supply OFF while the POWER switch on the camera is still set to ON.