E-78
11. MENU SCREENS
The HEADER REC menu screen is used for settings related to the HEADER REC function. (☞ page 56)
11-12 HEADER REC Menu Screen
START KEY
TC DATA
TC CLEAR
UB DATA
UB CLEAR
BARS TIME
BLACK TIME
PAGE BACK
STOP+VTR
DISABLE
EXECUTE
CANCEL
EXECUTE
CANCEL
EXECUTE
CANCEL
EXECUTE
CANCEL
0 SEC
99 SEC
0 SEC
99 SEC
–––––
Sets whether the HEADER REC operation should be executed when
the VTR trigger button is pressed while the STOP button is pressed.
STOP+VTR : HEADER REC operation is executed.
DISABLE : HEADER REC operation is not executed.
Sets the time code value for the point when the Record-Standby mode
is engaged following completion of HEADER REC.
EXECUTE : Confirms the set time code.
CANCEL : Clears the set time code.
*The time code value at the point when the Record-Standby mode is
engaged may differ some frames from the value set for this item.
To reset the time code setting of the TC DATA item, set to EXECUTE
and then press the SHUTTER dial.
EXECUTE : Resets.
CANCEL : No reset.
Sets the user’s bits of the HEADER REC section.
EXECUTE : Confirms the set user’s bits.
CANCEL : Clears the set user’s bits.
To reset the user’s bits setting of the UB DATA item, set to EXECUTE
and then press the SHUTTER dial.
EXECUTE : Resets.
CANCEL : No reset.
Sets the duration (seconds) in which the color bar signal and test tone
(1 kHz) is recorded during HEADER REC. (1-sec steps)
Sets the duration (seconds) in which the black signal is recorded during
HEADER REC. (1-sec steps)
The TC/UB/CLOCK menu screen returns when the SHUTTER dial is
pressed.
DISABLE
EXECUTE
CANCEL
EXECUTE
CANCEL
30 SEC
30 SEC
–––––
Item Function Variation Range Initial Setting
~~
MEMO:
●The user’s bits for the normal recording section are set on the TC/
UB/CLOCK menu screen.
●When the network pack KA-DV5000 is connected, and the HEADER
REC section should be recorded on the CF card, make sure to set
the user’s bits for the HEADER REC section and the normal
recording section to the same value.
●This item cannot be set when the UB REC item on the TC/UB/
CLOCK menu screen is set to OFF. In this case, “- - - -” is displayed.