![](/images/new-backgrounds/1326557/32655721x1.webp)
Connect the base unit
1 Connect the telephone line cord to the TEL LINE jack and to a telephone outlet.
2 Connect the AC adapter to the DC | • Place the power cord so | ||
IN 9V jack and to a standard 120V | it does not create a trip | ||
hazard or where it could | |||
AC wall outlet. |
| ||
| become chafed and | ||
3 Set the base unit on a desk or | create a fire or electrical | ||
hazard. | |||
tabletop. Place the handset on the | • Use only the supplied | ||
base unit as shown. Then raise the | |||
antenna to a vertical position. | Do not use any other AC | ||
|
| adapter. | |
If your telephone outlet isn´t modular, contact | • Connect the AC adapter | ||
your telephone company for assistance. | |||
to a continuous power | |||
| Modular | ||
| supply. | ||
Choose the dialing mode |
| • Place the base unit close | |
Depending on your dialing system, set the | to the AC outlet so that | ||
you can unplug the AC | |||
If your dialing system is | Set the switch to | adapter easily. | |
| |||
Tone | TONE |
| |
Pulse | PULSE |
| |
If you aren´t sure of your dialing system, |
| ||
make a trial call with the |
| ||
set to TONE. |
|
| |
If the call connects, leave the switch as is; |
| ||
otherwise, set to PULSE. | G E T T I N G S TA R T E D [ 9 ] | ||
|
GETTING STARTED