![](/images/new-backgrounds/1326557/32655785x1.webp)
Selecting the message record time
You can set your answering system to record messages up to one or four minutes long.
One minute option: move the REC TIME switch to 1.
Four minutes option: move the REC TIME switch to 4.
▼Announce only feature:
The announce only feature plays an outgoing message, but it will not allow the caller to leave a message. Move the REC TIME switch to the ANN position. The message counter LED displays “ “ when the system is on standby. Prerecorded outgoing message for Announce only feature is:
“Hello, no one is available to take your call.“ (twice)
Selecting a PIN code
To play your messages from a remote location, you will need to enter a
1On the base, press and hold until a tone sounds and the LED displays
.
2To set the f irst number, press or
repeatedly to scroll from 0 to 9.
When the desired number appears in the display, press .
3To set the second number, press or
to scroll from 0 to 9. When the
desired number appears in the display, press . Then the entered PIN code is announced.
Press and hold or
to quickly scroll
through numbers on the display.
T H E I N T E G R A T E A N S W E R I N G D E V
T H E I N T E G R AT E D A N S W E R I N G D E V I C E [ 41 ]
D I C E