Uniden TRU 8866 owner manual B. Install the rechargeable battery pack into the handset

Models: TRU 8866

1 76
Download 76 pages 7.42 Kb
Page 10
Image 10
B. Install the rechargeable battery pack into the handset

note [ 9 ] S E T T I N G U P T H E P H O N E

Use only the Uniden (BT-446) rechargeable battery pack supplied with your cordless telephone.

Replacement battery packs are also available through the Uniden Parts Department at

(800)554-3988, Monday thru Friday from 8:00 a.m. to 5:00 p.m. or online at www.uniden.com

B. Install the rechargeable battery pack into the handset

The handset is powered by a rechargeable battery pack. The battery recharges automatically when the handset is placed in the base unit.

1) Press down on the handset battery case cover (use the finger indention for a better grip) and slide the cover downward to remove.

2) Plug the battery connector (red & black wires) into the jack inside the battery compartment. (The connector notches fit into the grooves of the jack only one way). Match the wire colors to the polarity label in the battery compartment, connect the battery and listen for a click to insure connection.

3) Make sure you have a good connection by gently pulling on the battery wires. If the connection is secure, the battery jack will remain in place.

4) Place the battery case cover back on the handset and slide it upwards until it clicks into place.

[ 9 ] S E T T I N G U P T H E P H O N E

w w w . u n i d e n . c o m

Page 10
Image 10
Uniden TRU 8866 owner manual B. Install the rechargeable battery pack into the handset, S E T T I N G U P T H E P H O N E