3)Use the number keypad to enter your personal access number (up to 20 digits). If you have an access number already entered, the current number will appear in the display. To delete that number, press the DELETE soft key, then the OK soft key.
4)If you need to have the phone wait before sending the next digits, press redial /p (or redial/pause on the base). A P appears in the display each time you press redial /p (or redial/pause on the base); each pause inserts a two- second delay in the dialing sequence, and each pause counts as one digit.
5)Press the OK soft key. You will hear the confirmation tone.
Setting Voice Mail Tone
There are two types of signals the phone company can use to tell your phone you have a voice message waiting: Frequency Shift Keying (FSK) and Stutter Dial Tone (SDT). The default is SDT. If your voice mail provider uses FSK to signal a waiting message, follow the steps below to deactivate the SDT feature on your phone:
1) Press MENU soft key. Select the Global Setup menu, and then the Voice Mail Tone Submenu.
2) Press volume up/down to select L1 or L2, and then press the OK soft key.
3) Press volume up/down to turn the voice message indication (SDT message signal) on or off.
4) Press the OK soft key. You will hear a confirmation
tone. | $#%- | &'.'6' | 1- |
|
|
|
[ 3 9 ] U S I N G Y O U R P H O N E | w w w . u n i d e n . c o m |