Uniden TRU 8866 owner manual Changing the Digital Security Code, Register the Handset

4)Charge the handset battery pack for at least 15-20 hours before using your new cordless telephone for the first time.

Changing the Digital Security Code

The digital security code is an identification code used to connect the handset and the base unit. Normally, setting the code is not necessary. In the rare situation that you suspect another cordless telephone is using the same security code, you can change the code. To change the digital security code:

1)De-register all the handsets you have (see “De-register the Handset (Handset only)” on page 15).

2)Register the handsets by following step 2-3 in “Register the Handset” on page 14.

Register the Handset

If you purchase an extra handset, you need to register the handset before use. Only one handset can be registered at a time.

Handsets supplied with the phone are registered to the base by the factory. When charged, pre-registered handsets display a handset ID number. Handsets that have

not been registered display Models vary! Charge handset on the base for registration or refer to Owner's Manual . When you register an extra handset to

the base, the handset ID will be assigned.

note

If a handset has ever been registered to a different base, you must de-register the handset before you can register it to the new base (see page 15).

CHANGING THE DIGITAL SECURITY CODE

w w w . u n i d e n . c o m C H A N G I N G T H E D I G I T A L S E C U R I T Y C O D E [ 1 4 ]