Setting a PIN code
To play your messages from a remote location, you will need to enter a
1)Press clock/menu twice. The current PIN code appears on the base and it is announced.
2)Press skip/select or repeat/select until the desired number appears. Press and hold skip/select or repeat/select to quickly scroll through the numbers on the display.
3)Press set to select the PIN code.
A confirmation tone sounds, the system announces the new PIN code.
Setting the ring time
The ring time setting allows you to set the number of rings the caller hears before your answering system plays the outgoing message. You can set the ring time to answer after two, four, or six rings. Setting "TS" (Toll Saver), the answering system picks up after two rings if you have new messages, and after four rings if there are none. This way, if you make a long distance call to check your messages, you can hang up after the second ring to avoid billing charges.
1)Press clock/menu three times.
The current ring time setting (2 , 4, 6, 
(Toll saver)) appears on the base and it is announced.
2)Press skip/select or repeat/select until the desired ring time appears.
3)Press set to select the new ring time.
A confirmation tone sounds, the system announces the new ring time.
w w w . u n i d e n . c o m | T H E I N T E G R A T E D A N S W E R I N G D E V I C E [ 6 1 ] |
