note

•Time stamp will not be heard until you have set the time.

•When the answering system is full, appears on the base. You should delete some messages so that the system can record new messages.

(Refer to "Deleting a message" on page 68.)

Remote access with the handset

You can operate your answering system from another room using a handset.

1)When the phone is in standby mode, press the soft key on the handset. Remote AnsweringMachine operation appears on the handset display. The answering system announces the current time and the number of messages stored in the memory.

2)You hear "To play incoming messages, press two. For help, press zero." You will hear a beep.

If you press end before the answering system answers, the phone will return to standby.

If the answering system does not answer within 6 seconds, you hear a beep and the phone will return to standby.

If you receive a call, the remote operation is cancelled.

During the remote operation - - appears on the base.

If you have new messages and old messages, after you have reviewed your new messages, you can play your old messages by pressing 2 again.

3)Enter a command within 30 seconds. Select a command from the following chart:

[ 7 2 ] T H E I N T E G R A T E D A N S W E R I N G D E V I C E

w w w . u n i d e n . c o m

Page 74
Image 74
Uniden TRU 8880 owner manual Remote access with the handset