note 
•Time stamp will not be heard until you have set the time.
•When the answering
system is full, (7.. appears on the base. You should delete some messages so that the system can record new messages. (Refer to "Deleting a message" on page 59.)
6)When you are finished, hang up to exit the system. The answering system automatically returns to standby.
Remote access with the handset
You can operate your answering system from another room using a handset.
1)When the phone is in standby mode, press the 
soft key on the handset. Remote AnsweringMachine operation appears on the handset display. The answering system announces the current time and the number of messages stored in the memory. Messages will be played in the order in which they were received. The time and day that each message was received is announced after the message is played.
2)You hear "To play incoming messages, press two. For help, press zero." You will hear a beep.
•If you press end before the answering system answers, the phone will return to standby.
•When the answering system does not answer within 6 seconds, you hear a beep and the phone will return to standby.
•When you receive a call, the remote operation is canceled.
• You can change the handset volume during a remote operation.
•During the remote operation AnsweringMachine operation appears on the base.
•If you have new messages and old messages, after you have reviewed your new messages, you can play your old messages by pressing 2 again.
3)Enter a command within 30 seconds. Select a command from the following chart:
[ 6 4 ] T H E I N T E G R A T E D A N S W E R I N G D E V I C E | w w w . u n i d e n . c o m |
