Adjusting the Ringer, and Earpiece and Speaker Volume
Ringer volume
In standby mode, press the volume up key or volume down key on the handset or base to select one of three ringer volume (Off, Low, or High).
Earpiece and Speaker Volume
You can select from among of six volume levels on the handset, and ten levels on the base. Pressing the volume up key or volume down key on the handset or base during a call will change the earpiece or speaker volume. This setting will remain in effect after the telephone call has ended.
If you press the volume up key when the earpiece is at the maximum volume level, an error tone sounds.
The error tone also sounds if you press the volume down key at the lowest volume.
Do Not Disturb (DND)
The do not disturb feature (DND) allows you to mute the ringer, the base, and any registered handsets at the same time. The phone must be in standby mode. Press and hold do not disturb on the base. You will hear a confirmation tone, and the
[ 3 6 ] B A S I C S | w w w . u n i d e n . c o m |
