3) Press the OK soft key. You will hear a confirmation tone.
Setting the Ring Time
Ring Time allows you to set the number of rings the caller hears before your answering system plays the outgoing message. You can set the ring time to answer after two, four, or six rings. If you enable the Toll Saver (TS), the answering system picks up after two rings if you have new messages and after four rings if there are none.
1)Enter the Answ. Setup menu, and then the Ring Time submenu (see "Entering the Menu Option" on
page 16).
4KPI6KOG 6QNN5CXGT 6KOGU
2) | Press | volume up/down to select a Ring Time (Toll |
| $#%- | &'.'6' | 1- |
|
|
|
| |||
| Saver, 2 Times, 4 Times, or 6 Times). |
|
|
| ||
3) | Press the OK soft key. You will hear a confirmation tone. |
|
|
| ||
Setting the Record Time
Record Time sets the duration for recording the incoming messages. You have three record time options. The options "1 minute" or "4 minutes" set the duration for recording the incoming messages. "Announce only" answers the call but prevents the caller from leaving a message.
1)Enter the Answ. Setup menu, and then the Record Time submenu (see "Entering the Menu" on page 16).
2)Press 
volume up/down to select Record Time (1 Minute, 4 Minutes, or Announce Only).
4GEQTF6KOG /KPWVG
/KPWVGU
$#%- &'.'6' 1-
[ 2 6 ] G E T T I N G S T A R T E D | w w w . u n i d e n . c o m |
