Searching for Active Frequencies
Many people enjoy searching for the unknown frequencies that are in use in their area but are not posted to any site or in any publication. The UBC340CRS has two ways to search: Limit searching that searches between two set frequencies and Service Searching that searches for specific types of services.
Using Limit Search
Programming an Upper/Lower Limit
Follow these steps to program an Upper and Lower limit for the limit search:
1.Press SEARCH then HOLD. The scanner holds on the current search frequency.
2.Enter one of the range limits, then press E/PGM.
Press s or t then enter the other range limit , and press E/PGM.
Searching the Selected Range
After entering the limits (or use the default limits), press SEARCH. The scanner starts searching from the lower range up to the higher range. To change the direction of the search, press s or t.
Using Service Search
You can select any of Police, Marine, Rail Road,
Selecting a Service to Search
Press SVC to enter the service search mode, then press the button corresponding to the service you want to search. When the scanner stops on a transmission, you can force it to resume searching by pressing
sor t.
Searching for Active Frequencies
24
UBC40CRS OM.indd 4 | 7/5/08 4:8:0 PM |
