7
Features
Channel Memory Scanning - Scans frequencies you have stored in any
of the channels or banks at a rate of up to 60 channels per second.
Memory Availability - Store and then scan any of up to 100 channels
distributed over 10 banks.
Direct Channel Access - Press 0 - 9 and HOLD to directly access any
stored frequency.
Channel Lockout/Frequency Lockout - Skip over stored frequencies
(channels) using the Lockout feature to enable faster scanning. Lets you
designate up to 50 frequencies to skip during a search (limit or service) to
increase the scanning speed.
Alarm Clock with Snooze - provides standard radio broadcasts that you
can set as your alarm sound.
AM/FM and TV Broadcast - lets you store up to 30 preset broadcast
channels (10 AM and 20 FM/TV) for quick access. TV Broadcast allows
tuning to the audio of CH 0-2 and 6-10 in Australian Mode and CH1-9 in
New Zealand Mode.
Air Band - separate search setting for Air band, 118MHz to
136.9875MHz.
Priority Channel - Designate a specific frequency as a Priority Channel.
Then the radio scans and checks that channel every 2 seconds. Select
and designate up to 10 frequencies as Priority Channels (one per bank).
Duplicate Channel Alert - Lets you know that a selected frequency has
already been programmed into memory if you attempt to store it again.
Limit Frequency Searching - Lets you designate lower and upper
frequency range and search within that range for active frequencies.
You can then store frequencies in memory as channels for later recall.
Service Search - Lets you designate one of the five preprogrammed
service channels (Police, Marine, Railroad, AM-CB, UHF-CB) to search.
Scan and Search Speed
Scan Speed 60 channels per second maximum in SCAN MODE.
Search Speed 60 steps per second maximum in SEARCH MODE.
TURBO MODE For frequency steps 5kHz apart, searching occurs in
Turbo Mode which is 180 steps per second.
•
•
•
Introduction
UBC340CRS OM.indd 7 7/5/08 4:28:06 PM