CAUTION: Be sure to follow all safety warnings provided with the antenna. Failure to do so could expose you to risk of injury or death and could severely damage the scanner.

Using the Backlight

To turn on the backlight for 5 seconds, tap SNOOZE/Backlight. To turn on the backlight permanently, press and hold SNOOZE/Backlight for over 2 seconds. To turn off the backlight, press and hold SNOOZE/Backlight again.

Country Mode (Australia/New Zealand)

The UBC340CRS is set to the Australian mode by default.

Australian mode: Australian service search frequencies and TV channel frequencies.

New Zealand mode: New Zealand service search frequencies and TV channel frequencies.

The country mode can be switched between Australia (AUS) and New Zealand (nL) as follows:

1.Turn on the power while pressing down the [HOLD] key.

The display will momentarily show AUS for Australian mode or nL for New Zealand mode.

The country mode is remembered for the next power on.

2.To change the country mode again, repeat step 1.

Setting Up The Scanner

15

UBC40CRS OM.indd 5

7/5/08 4:8: PM

Page 16
Image 16
Uniden UBC340CRS owner manual Using the Backlight, Country Mode Australia/New Zealand