If You Want to do This - | Here’s How - | |
Resume scanning | • Any bank key - If you press a different | |
(Cont.) |
| bank key, you will start scanning in |
|
| that new bank and the bank label will |
|
| resume flashing. |
| • L/O key - Press this key to lock out | |
|
| this frequency and step to the next |
|
| frequency. |
|
| |
Keep scanning after the | If the UBC355XLT stops on an active | |
UBC355XLT has stopped | channel that you do not want to | |
on an active channel | monitor but you do not want to lock | |
| out, press the Up key. You will scan to | |
| the next frequency. | |
Select a different bank | Use one of the following two | |
to scan | methods: | |
| 1. | Use the Up key to move through |
|
| frequencies and banks. |
| 2. | Deactivate the bank(s) you do |
|
| not want to listen to, leaving only |
|
| the desired band active. |
33