PROBLEM | SOLUTION |
Scan won’t start | Try one of these options: |
| • Press the bank key again. |
| • Adjust the Squelch Control. |
| • Program frequencies into the bank |
| before using (for PRIVATE bank). |
| • Check to see if all channels are locked |
| out. It is possible that none of the |
| programmed frequencies are active at |
| the time. Try the band search. |
|
|
Search won’t | • Adjust the Squelch Control. |
start | • Check the antenna connection. |
| |
|
|
Prog key won’t | Stop scan or search. |
work |
|
You still have a | Visit the customer support page on our |
problem | website; www.uniden.com.au for Australia or |
| www.uniden.co.nz for New Zealand. |
|
|
59