Pressing UCB/CB more than once will cycle through the banks in this order:
1.UHF CB/ AM CB
2.UHF CB
3.AM CB
4.None
Scanning Service Bank TipsIf You Want to do This - | Here’s How - |
Begin scanning | Press any service bank key; the bank |
| label flashes and the “SCAN” message |
| moves across the display screen. |
| Scanning automatically stops on |
| an active channel and displays that |
| frequency (except for |
| channels, which will be covered later |
| in this guide). It will stay on that |
| channel until the transmission ends. |
| Note: You must program |
| channels into the PRIVATE bank |
| before you can scan it.. |
31