Visit our online store via our website; www.uniden.com.au for Australia or www.uniden.co.nz for New Zealand.

INSTALLING THE UBC355XLT SCANNER

FOR HOME USE (DESKTOP INSTALLATION)

1.Insert the DC plug end of the AC Adapter into the DC 13.8V jack on the rear panel.

2.Plug the AC Adapter into a standard 240V AC wall outlet.

3.Plug the Telescoping Antenna into the ANT connector. Extend the antenna to its full height. For frequencies higher than 400 MHz, shortening the antenna may improve the reception.

Use the desktop stand (fold out from bottom of unit) for a better viewing and operating angle. Helpful Hints

If strong interference or electrical noise is received, relocate the scanner or its antenna away from the source.

If you are operating the scanner in a fringe area or need to improve reception, use an optional antenna designed for

14