can also lock out all channels.) If you lock out all the channels or frequencies in one of these banks, pressing that bank key will make the scanner emit an error tone and the scanner will not scan.
Lock Out TipsIf You Want to Do This - | Here’s How - |
|
|
Temporary Lock Out | While on a channel or frequency, press |
| L/O once. The scanner beeps and |
| temporarily locks out that channel |
| and displays “T L/O.” If the scanner was |
| not in Hold mode, it then resumes |
| scanning. If the scanner was in Hold |
| mode, it does not resume scanning |
| until one of the following actions is |
| taken: |
| • Press Hold again to release the |
| Scan Hold function. Scanning |
| resumes on that bank. |
|
|
39