Solving Problems
If you have any trouble with your system, try these simple steps first. If you still have a question, call our Customer Care Line listed on the front cover.
| If… | Try.. |
| | |
| The image on the | --Adjusting the brightness on the receiver (in the System Setup sub-menu). |
| display is too bright. | --Moving the camera’s sun shield over the lens. |
| | |
| The image on the | --Adjusting the brightness on the receiver (in the System Setup sub-menu). |
| display is too dim. | --Making sure the camera is at the right distance for low-light conditions. |
| | |
| The image on my | --Adjusting the brightness on your television. (The receiver brightness |
| television is too bright/ |
| setting does not affect the television.) |
| dark. |
| |
| | |
| The image does not fit | --Changing the TV out setting on the receiver (in the System Setup sub- |
| my TV screen. | menu). |
| | |
| | --Making sure the AV output cable is not connected. |
| The display is | --Making sure the receiver is plugged in. |
| --Switching to a different camera. (If the receiver is in quad display mode |
| completely blank. |
| and the cameras are not working, the screen could be blank.) |
| |
| | --Resetting the receiver. |
| | |
| | --Switching to a different channel. |
| The display just says | --Checking the channel status icon at the top of the screen to see which |
| channel the receiver is on. Make sure the camera assigned to this |
| No Signal. |
| channel is powered on. |
| |
| | --Re-pair the camera to the receiver. |
| | |
| The display just says | --Disconnecting the USB cable. |
| USB PC Camera Mode. |
| The image on the | --Resetting the camera. |
| screen is frozen. | --Resetting the receiver. |
| | |
| None of the buttons on | |
| the receiver respond | --Resetting the receiver. |
| when I press them. | |
