Getting Started

Connect the Power

1. Connect the standard AC adapter to the receiver’s power input.

POWER

button

2.Attach an antenna to the rear of each camera and connect an AC adapter to the camera’s power input pigtail. (If necessary, connect the extension cord to the camera’s pigtail and connect the AC adapter to the extension cord.)

AC Adapter

3.Connect the other end of each adapter to a 120 volt AC (standard indoor) power outlet, and press the Power button on the side of the receiver.

Antenna

AC Adapter

4.Make sure

the Power status lights on the front of the receiver and each camera all turn on.

OK

Power status lights

If...

Try...

a Power status

--reconnecting the AC adapter

light doesn’t

--seeing if the power outlet is

come on

controlled by a wall switch

 

 

4

Page 4
Image 4
Uniden UDW10055 user manual Getting Started, Connect the Power, Try