Uniden UDWC23 Learning the Buttons and Lights, Using the Camera Mount, Button What it does

Learning the Buttons and Lights

Button	What it does
POWER	Turn the camera on. Press and hold to turn it off.
Link	Enter pairing mode.
Light	State	What it means
Power Status	On	The camera is on.
light	Off	The camera is off.
Link Status	Flashing	The camera is in pairing mode.
	Orange	The camera is connected to the receiver.
light
	Off	The camera is in standby.
Battery	Green	The battery is charging.
	Red	The battery is low; the camera will turn off in 3 minutes.
Status light
	Off	The battery is fully charged.

Using the Camera Mount

The camera has a built-in stand so you can place it on any flat surface. If you want to place your camera on a wall or a ceiling (or even if you just want to secure it to a flat surface), you can use the included camera mount. (You might want to bring the receiver along when you mount the camera; it’s much easier to get the camera into the right position when you have the display handy.)