![](/images/new-backgrounds/1217315/21731511x1.webp)
Mounting
Camera screw brace
Mounting
post
Post
lock
Screw holes
1.Hold the base of the mount where you want to attach it, and mark the location of the screw holes.
2.Use the included screws and anchors to attach the base to the wall or ceiling.
3.Attach the camera to the mounting screw. Tighten it a few turns, then turn it to the direction you want.
4.Tighten the camera brace up against the back of the camera to secure it into place.
5.Unlock the mounting post by turning the wingnut to the left a few turns.
. Set the mounting post to the correct angle, then tighten the wingnut until the post is locked into place.
| Tighten the brace against | 1 | Attach the camera |
2 | to the mounting | ||
the camera to |
| screw and turn it | |
| secure it |
| to the desired |
| in place. |
| direction. |
3 |
|
|
|
Loosen the |
|
| |
wingnut to |
| Adjust the post to | |
unlock the | 4 | ||
mounting | the correct angle, | ||
post. |
|
| then tighten the |
|
|
| wingnut to lock the |
|
|
| post into place. |