Scanning
Pressing the SCAN button one time will initiate scanning, and scanning is stopped either by pressing the button a second time or pressing the
Programming Scan Channels
When the radio is initially turned on, there will not be any channels programmed in the Group Scan Memory.
To Program scan channels into the Group Scan Memory, use the following proce- dure:
1.Select the NORMAL mode (or when scanning, cancel scanning by pressing the SCAN button.)
2.Select the GROUP SCAN mode by pressing the OS/GS button. The GS indicator should appear.
3.
4.
5.
Rotate the CHANNEL SELECTOR knob until the channel you wish to scan is displayed. Note that the MEM indicator should not appear, indicating that this
channel is not currently programmed in the GROUP SCAN memory.
Press and hold the MEM button for about 1.5 seconds until a beep is heard. The MEM indicator should now appear indicating that the channel is now pro- grammed in memory.
Continue steps 3 and 4 to program all the channels you wish to scan.
Select | Select | Select | Program | 'MEM'lcon |
NORMAL | GroupSCAN | CHANNEL | CHANNEL | ...u,. ON |
|
|
|
| |
SCAN | OSIGS | IdII!n | Mal | "Ef(- |
11\ | ||||
D | D |
| D | U', |
1+1 | 1+ | (0) | 1+ | |
| ||||
|
| I) I |
| |
|
|
| .... BEEP!'" |
|
Page 8
