Caller ID
You must subscribe to Caller ID service to use this feature.
When the telephone rings, the Caller ID feature allows you to view the caller’s name and phone number on the display before you answer the phone. Additionally, you can dial the displayed number and store the information for memory dialing.
Make sure you have turned on the Caller ID/Call Waiting feature. (See page 15.)
Important:
Memory locations for Caller ID messages and Phonebook locations are common, you can store up to 100 in total. Caller ID messages will not be stored when you have stored 100 entries in each phonebook locations. The earliest Caller ID message is overwritten when you have stored 100 entries in each phonebook locations and Caller ID messages in total.
If you get an incoming call, a transferring call, or page, the operation is canceled.
1) When the Caller ID message is received, the display shows the caller’s name and phone number along with the date and time. The incoming call information is stored in the Caller ID record. If the Caller ID service 
includes the caller’s name, the name will
appear on the display (up to 15 characters.). 
You may receive any one of the following messages:
When invalid data is received | “Incomplete Data” | |
When a private name is received | “Private Name” | |
When a private number is received | “Private Number” | |
When a unknown name is received | “Unknown | Name” |
When a unknown number is received | “Unknown | Number” |
2)When you pick up the phone, the display changes to “Talk”. (If AutoTalk feature is set to On.)
•If you answer a call before the Caller ID message is received (Example: before the second ring), the Caller ID message will not appear nor will it be stored in memory.
•When the call is received via a telephone company that does not offer Caller ID service, the caller´s phone number and name will not appear. (This includes some international calls.)
•When the call is via a private branch exchange (PBX), the caller´s phone number and name may not appear.
C A L L E R I D
