TROUBLESHOOTING
TROUBLESHOOTING
The status light won’t | • Make sure the AC adaptor is plugged into the base and wall outlet |
illuminatewhen the handset | • Make sure the handset is properly seated in the base. |
is placed on the base. | • Make sure the charging contacts on the handset and base are clean. |
|
|
The audio sounds weak | • Move the handset and/or base to a different location away from |
and/ or scratchy. | metal objects or appliances and try again. |
| • Press channel while on a call to change the operating channel. |
| • Make sure that you are not too far away from the base. |
|
|
Can’t makeor receive calls. | • Checkboth ends of the telephone line cordare plugged in firmly. |
| • Make surethe AC adaptor is plugged into the baseand wall outlet. |
| • Disconnect the AC adaptor for a few minutes, then reconnect it. |
| • Make sure that you are not too far from the base. |
| • Charge the handset. |
|
|
The handset doesn't ring or | • The battery pack may be weak. Charge the battery for |
receive a page. | • The handset may be too far away from the baseunit. |
| • Place the baseunit away from appliances or metal objects. |
|
|
If you still have a problem. | Australia: www.uniden.com.au New Zealand: www.uniden.co.nz |
|
|
Page 7
