GETTING STARTED
CONTROLS AND FUNCTIONS
1. | Handset antenna | 11. | key |
| 1 | ||
2. | Handset earpiece | 12. | volume key |
|
| ||
3. | Talk/batt low indicator | 13. | key | 16 | 2 | ||
4. | flash | key | 14. | channel | key | 17 |
|
5. |
| key | 15. | Handset charging contacts |
| 3 | |
6. |
| key | 16. | Status light | 18 | 4 | |
7. |
| /pause key | 17. | key |
| 5 | |
8. | Handset microphone | 18. | Base charging contacts |
|
| ||
9. | and ringer speaker | 19. | Telephone line jack |
| 7 | ||
| memory key | 20. | AC adaptor input |
| |||
|
|
|
|
|
|
| 6 |
10. |
| /call wait key |
|
|
|
| 8 |
|
|
|
|
|
|
| |
|
|
|
|
| 19 | 20 |
|
MOUNTING THE BASE UNIT ON A WALL
You can mount your phone directly to the wall. Before doing this, consider the following:
• Avoid electrical cables, pipes or other items behind the mounting location that could cause a hazard when inserting screws into the wall.
• Mount your phone within distance of a working phone jack.
• Make sure the wall material is capable of supporting the weight of the base and handset.
• Use screws with anchoring devices suitable for the wall material where the base unit will be placed.
1. Insert two mounting screws into a wall (with their appropriate anchoring device), 8.5cm apart. Allow about 3mm between the wall and screw heads for mounting the phone.
2. Plug the AC adaptor into the Base Unit and then into a power point.
3. Plug the telephone cord into the Base Unit and then into the telephone socket on the wall.
4. Align the mounting slots on the base with the mounting posts on the wall.
5. Then push in and down until the phone is firmly seated.
Page 1
talk | batt low | 9 |
|
| |
flash | RocketDial | 10 |
| i | |
| t |
|
m | a |
|
| lw |
|
| ca | 11 |
|
| |
|
| 12 |
|
| 13 |
pause |
| 14 |
|
| |
redial | channel |
|
15
