Storing Phone Numbers, Chain Dialing

DIALINGIn memory dialling operation, you must press a key within 30 seconds or the phone will return to standby.

To exit memory dialing operations,

press .

MEMORYThe pause feature is useful for long distance calling, credit card dialling or sequences of numbers that require a pause between digits.

STORING PHONE NUMBERS

Memory Dialing allows you to dial a number using just a few key presses. Your XS910 stores up to 10 numbers in the handset.
1.	Press	. The 'talk/batt low' indicator flashes.
2.	Use the number keys to enter the phone number. The phone number cannot exceed 20 digits.
	Use the	/pause to enter a pause in the dialing sequence if required. Each pause counts as one digit and represents
3.	a two second delay of time between the digits.
	Press	.
4.	Enter a number ( 0 - 9 ) to select the memory location where you would like to store the numbers. A confirmation tone
	is sounded.


1.	Press	. Press		.		) to select the memory location of the desired phone number. The number is dialed.
2.	Enter a number (		0	-	9
3.	To hang up, press			.


On certain occasions after dailing a number, you may be required to enter an access code such as your account number for
phone banking. You can enter this number into a memory location for later use by doing the following:
1.	Store the access code into one of the memory locations ( 0					-	9 ) following the above steps for Storing Phone Numbers.
2.	Dial the party or service main number.				followed by the memory location ( 0			- 9	).
3.	When you need to enter the special number, press				followed by the memory location ( 0			- 9	).
	ERASING A STORED PHONE NUMBER
1.	Press	twice.	-	9 ) to select the memory location you would like to erase.
2.	Enter a number ( 0		-	9 ) to select the memory location you would like to erase.
	A confirmation tone is sounded.

Page 5