UNIMAX Houseware KVM Switch operation manual Rack Mounting Instructions, Mount Switch to a Rack

NTI UNIMUX MULTI-USER KVM SWITCH

RACK MOUNTING INSTRUCTIONS

This NTI switch was designed to be directly mounted to a rack and includes a mounting flange to make attachment easy.

Install 4 cage nuts (supplied) to the rack in locations that line up with the holes (or slots) in the mounting flange on the NTI switch.

Then secure the NTI switch to the rack using four #10-32 x3/4” screws (supplied). Each screw should be of sufficient length to go completely through the NTI mounting flange, rack frame and fully engage all threads in the captive nut. Be sure to tighten all mounting screws securely.

Do not block power supply vents in the NTI switch chassis (if provided). Be sure to enable adequate airflow in front of and behind the NTI switch.

Attach all cables securely to the switch and where necessary supply adequate means of strain relief for cables.

#10-32x3/4" Rack Screws (supplied)

Rack

Cage Nuts

(supplied)

Figure 1- Mount Switch to a Rack

5