UNIMAX Houseware KVM Switch operation manual Installation, Nti

NTI UNIMUX MULTI-USER KVM SWITCH

INSTALLATION

It is not necessary to turn OFF power to CPUs or monitors during this installation unless RS-232 is going to be connected. All cables, except for the RS-232 cables, may be hot plugged.

If using RS-232 Control see RS-232 section on page 29 for more information. Observe normal precautions when connecting the RS232 cables to the CPU. Refer to the owner’s manual for the CPU being connected for precautions, if any.

1.Connect the 15HD male cable end from each user monitor to the female 15HD ports labeled "MONITOR x " on the rear of the UNIMUX switch. See Figure 2.

Rear View of UNIMUX

USER 4 USER 3 USER 2 USER 1

MONITOR 3

NTI

R NETWORK

1275

Danner Dr

Tel:330-562-7070 www.nti1.com

INCORPORATEDTECHNOLOGIES

Aurora, OH 44202

Fax:330-562-1999

CPU 16 CPU 15 CPU 14

CPU 13 CPU 12 CPU 11 CPU 10

CPU 9 CPU 8

CPU 7 CPU 6

CPU 5 CPU 4

CPU 3 CPU 2

CPU 1

MONITOR 1

VIDEO 15

VIDEO 13

VIDEO 11

VIDEO 9

VIDEO 7

VIDEO 5

VIDEO 3

VIDEO 1

R
S
2	4	MONITOR	VIDEO 16	VIDEO 14	VIDEO 12	VIDEO 10	VIDEO 8	VIDEO 6	VIDEO 4	VIDEO 2
2

MONITOR 1

15HD Male

Video Connector

15HD Female

Video Connector

Monitor

Figure 2- Install user monitor(s)

6