NTI UNIMUX
F3- Display Information
To display information about a selected port, pressing the <F3> key from within the Command Mode main menu will cause a window to open (see below). The window will show the name of the port and its position in the system structure, level by level. This is most useful when cascading switches (see Cascading- page 35).
The image above indicates that the CPU connected to this port is actually connected through port 1 of the master switch (Level 1), and through port 6 of the slave connected to the master switch port 1 (Level 2). (See Figure 16.)
USER 1
USER PORTS
| UNIMUX |
|
|
| LEVEL 1 | ||||
| MASTER |
|
|
| |||||
|
|
|
|
|
|
|
| ||
CPU PORT1 |
|
|
|
|
|
|
| ||
|
|
|
|
|
|
| |||
|
|
|
|
|
|
| |||
|
|
|
|
|
| ||||
|
|
| USER |
| PORTS | ||||
|
|
|
| ||||||
| LEVEL 2 |
|
| UNIMUX | |||||
|
|
| SLAVE | ||||||
|
|
|
| CPU PORTS | |||||
|
|
|
|
|
|
|
|
|
|
CPU PORT6
CPU
Figure 16- Port information- system structure
18
