Unitech PA600 user manual Charging the Battery using the USB Cable

Charging the Battery

Before using the PA600 for the first time, you need to charge it for about 16 hours. After that, you can charge the PA600 every day to recharge the battery to full capacity. Charge the PA600 using the USB charging cable or the docking station.

CAUTION! Operating the PA600 for the first time without the AC adapter, and without fully charging the backup battery may result in loss of data stored in RAM memory. When the main battery is removed, the backup battery retains RAM data in memory for 2 hours, please charge the battery for the period to avoid the data loss in RAM memory.

NOTE: Data you enter may not be properly stored until the built-in backup battery has been adequately charged.

Charging the Battery using the USB Cable

1.Press and hold the connector button on the USB charging cable and connect it to the PA600 (1).

2.Plug the AC adapter cable into the power jack on the USB charging cable (2).

3.Connect the AC adapter into an electrical outlet (3).

8

Copyright 2006 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.