IMPORTANT:
PRESSURE TESTING MUST
BE PERFORMED BY A
QUALIFIED TECHNICIAN
ONLY.
NOTE: The maximum inlet pressure from the supply piping must not exceed ½ p.s.i (14” W.C.) Pressure above this limit will damage the regulator and gas valves.
Port for measuring outlet gas pressure is located on the manifold. Remove the grease drawer to gain access. Remove the allen head plug sealing the test port, then connect the hose of a water column gauge.
Be sure to reinstall the allen head plug at the conclusion of testing.
121 p/n 45324 OpManual Built-In Electric Griddles
7
