6041TP PEDESTAL TRIM ASSEMBLY
Assemble trim pieces as shown with the screws provided in the parts bag.
After trim assembly, attach to the pedestal base at the location shown using the screws provided.
6041HF ASSEMBLY
Assembly
1. Unpack unit and make sure all components are included; (4) Legs, and all hardware for installation.
2. Fold the corner padding from the carton and lay it on the floor behind the unit. This is used to hold the heater up off the floor to install the legs. Gently tilt the heater on its back, door opening up.
3. Assemble the legs as shown using the eight(8)
4. After all bolts and screws have been tightened properly, carefully set the heater back up on the legs.
USSC | 3 |
