Atlas Manual rev2 12/27/02 11:07 AM Page 24
USING THE MASTER POWER KEY
The Atlas Universal Remote Control has a unique feature that allows you to sequentially turn on or off all of your home entertainment devices with a single key press.
NOTE: MASTER POWER only works in the CBL mode. If it is not programmed, only the cable converter will turn on or off. In any other mode, pressing MASTER POWER once will turn on or off the selected device.
To Program The Master Power Key:
1.On the remote control, press and hold SETUP until the
2. 
Enter 9 - 9 - 5. The
3. 
For the first device you want in the power on sequence, press a device key (e.g., CBL) once 
and then press POWER once.
4.Repeat step 3 up to three more times to add the second, third, and fourth device, as desired.
5. 
To save the settings and exit the program, press
CBL once. Next, press and hold SETUP until the CBL key blinks twice, then release SETUP.
To Clear The Master Power Key:
1.Perform steps 1 and 2 in the above section.
2.To clear the settings and exit the program, press and hold SETUP until the CBL key blinks twice, then release SETUP.
To Operate The Master Power Key:
1. 
After programming, point the remote control at the devices. Press CBL once.
2. 
Press MASTER POWER once to sequentially turn 
on or off all home entertainment devices.
3.You will see the devices turn on or off according to the programmed sequence.
24
