Contents
MILLENNIUM
Universal Remote Control
User’s Guide
Key Charts Installing Batteries
TABLE OF CONTENTS
Setup Codes for TVs
Setup Codes for VCRs
INTRODUCTION
Preprogrammed technology for easy setup
Color-coded keys to quickly locate popular functions
Option key for assigning your favorite channels
FEATURES AND FUNCTIONS
Key Charts
Key Charts continued
❶ ❷ ❸
INSTALLING BATTERIES
PROGRAMMING TV CONTROL
Setup Codes for TVs
TV Brand
1. Turn on the TV
0060,0030,0056,0039,0046,0092,0186,0280
Bell & Howell
Curtis Mathes
Anam National
0047,0051,0093,0019,0018,0038,0090,0135
Setup Codes for TVs continued
Radio Shack
0054,0180,0150,0060,0019,0179,0056,0016,0039
Vector Research
0054,0165,0030,0178,0021,0019,0179,0056,0016,0020
PROGRAMMING VCR CONTROL
Setup Codes for VCRs
1. Turn on your VCR and insert a video cassette
5. Write your VCR code in the boxes below for future reference
Harman/Kardon
0035,0037,0048,0039,0047,0240,0000,0104,0162,0046
Setup Codes for VCRs continued
0060,0035,0048,0240,0042,0149,0077,0105,0106,0202
0035,0037,0048,0047,0000,0104,0062,0046,0066
0060,0035,0048,0047,0081,0240,0000,0042,0072,0149
PROGRAMMING TV/VCR COMBO CONTROL
Curtis Mathis
Setup Codes for TV/VCR Combos
To program the Cable key
To unlock the Cable key
PROGRAMMING CABLE CONVERTER OR DBS RECEIVER CONTROL
1. Turn on the Cable Converter or DBS Receiver
To lock the Cable key
Setup Codes for Cable Converters
2. Enter 9 - 9 - 7. The LED will blink twice
3. Press CH + once. The LED will blink twice
Setup Codes for Cable Converters continued
Setup Codes for DBS Receivers
To Reset Channel Control To Cable Converter
USING THE SHIFT KEY
To Activate Cable’s Video On Demand Using The VCR Transport Keys
To Reset VCR Transport Keys for VCR Use
SEARCHING FOR YOUR CODE
1. Turn on your TV
CHECKING THE CODES
3. Enter 9 - 9 - 0. The LED will blink twice
5. Repeat step 4 three more times for remaining
To program OPTION for all On/Off
twice, then release SETUP
To program OPTION to remember channels
2.Enter 9 - 9 - 5. The LED will blink twice 3. Press OPTION once
5. The OPTION key is now clear and ready for reprogramming
To clear the OPTION key
2.Enter 9 - 9 - 5. The LED will blink twice 3. Press OPTION once
TROUBLESHOOTING
For help via the Internet, visit us at cable.rcinfo.com
ADDITIONAL INFORMATION
do not type in http// or www before the address
For help via e-mail, contact us at CableHelp@ueic.com
