Universal Electronics pmn manual Programming VCR Control, Setup Codes for VCRs

PROGRAMMING VCR CONTROL

NOTE: If you own a TV/VCR combination, skip this section and perform “Programming TV/VCR Combo Control” on page 16.

Locate the brand name of your VCR in the Setup Codes For VCRs section below, and write it in the following space.

VCR Brand: __________________________________

The brands are listed in alphabetical order with the most popular codes listed first.You will use one of these codes to program the Millennium 3 to operate your VCR:

1.Turn on your VCR and insert a video cassette.

2. On the Millennium 3, press VCR once. Press and hold SETUP until the LED blinks twice, then release SETUP.

3.Enter the first four-digit code for your VCR. If you perform this procedure correctly, the LED will blink twice.

NOTE: If the LED did not blink twice after entering the code’s last digit, then repeat steps 2 through 3 and try entering the same code again.

4.Aim the Millennium 3 at your VCR and press VCR once. The VCR should turn off. If your VCR

remote control does not have a POWER key, press PLAY. If the VCR does not respond, repeat steps 2-3, trying each code listed for your brand until you find one that works. If the VCR still does not work , try searching for the code (see Searching For Your Code on page 22).

5.Write your VCR code in the boxes below for future reference.

NOTE: Remember, to use the Millennium 3 to operate your VCR, press VCR first.

Setup Codes for VCRs:

Admiral	0048
Adventura	0000
Aiko	0278
Aiwa	0037, 0000, 0307
Akai	0041, 0061, 0106
American High	0035
Asha	0240

12