Universal Remote Control
MILLENNIUM
User’s Guide
Setup Codes for VCRs
TABLE OF CONTENTS
Key Charts Installing Batteries
Setup Codes for TVs
Option key for assigning your favorite channels
Preprogrammed technology for easy setup
INTRODUCTION
Color-coded keys to quickly locate popular functions
FEATURES AND FUNCTIONS
Key Charts
Key Charts continued
❶ ❷ ❸
INSTALLING BATTERIES
1. Turn on the TV
Setup Codes for TVs
PROGRAMMING TV CONTROL
TV Brand
Anam National
Bell & Howell
0060,0030,0056,0039,0046,0092,0186,0280
Curtis Mathes
Setup Codes for TVs continued
0047,0051,0093,0019,0018,0038,0090,0135
Radio Shack
Vector Research
0054,0180,0150,0060,0019,0179,0056,0016,0039
0054,0165,0030,0178,0021,0019,0179,0056,0016,0020
5. Write your VCR code in the boxes below for future reference
Setup Codes for VCRs
PROGRAMMING VCR CONTROL
1. Turn on your VCR and insert a video cassette
Harman/Kardon
0035,0037,0048,0047,0000,0104,0062,0046,0066
Setup Codes for VCRs continued
0035,0037,0048,0039,0047,0240,0000,0104,0162,0046
0060,0035,0048,0240,0042,0149,0077,0105,0106,0202
0060,0035,0048,0047,0081,0240,0000,0042,0072,0149
PROGRAMMING TV/VCR COMBO CONTROL
Curtis Mathis
Setup Codes for TV/VCR Combos
1. Turn on the Cable Converter or DBS Receiver
To unlock the Cable key
To program the Cable key
PROGRAMMING CABLE CONVERTER OR DBS RECEIVER CONTROL
3. Press CH + once. The LED will blink twice
Setup Codes for Cable Converters
To lock the Cable key
2. Enter 9 - 9 - 7. The LED will blink twice
Setup Codes for Cable Converters continued
Setup Codes for DBS Receivers
To Reset VCR Transport Keys for VCR Use
USING THE SHIFT KEY
To Reset Channel Control To Cable Converter
To Activate Cable’s Video On Demand Using The VCR Transport Keys
SEARCHING FOR YOUR CODE
5. Repeat step 4 three more times for remaining
CHECKING THE CODES
1. Turn on your TV
3. Enter 9 - 9 - 0. The LED will blink twice
2.Enter 9 - 9 - 5. The LED will blink twice 3. Press OPTION once
twice, then release SETUP
To program OPTION for all On/Off
To program OPTION to remember channels
To clear the OPTION key
5. The OPTION key is now clear and ready for reprogramming
2.Enter 9 - 9 - 5. The LED will blink twice 3. Press OPTION once
TROUBLESHOOTING
For help via e-mail, contact us at CableHelp@ueic.com
ADDITIONAL INFORMATION
For help via the Internet, visit us at cable.rcinfo.com
do not type in http// or www before the address