To Lock Volume Control To One Mode (Global Volume Lock):
NOTE: The audio mode’s volume controls are active regardless of Volume Lock settings. However, if you lock the volume controls to the AUD mode, you will have control of the audio device’s volume in all other modes (i.e., TV , VCR, and CBL).
1. 
On the remote control, press and hold SETUP until the
2. 
Enter 9 - 9 - 3. The
3. 
Select a mode (e.g., TV) where you want to globally lock the volume controls. The select- ed device key will blink twice.
4.Now, when you press VOL+,
TROUBLESHOOTING
PROBLEM: Mode key does not blink when you press a key.
SOLUTION: Replace the batteries with two (2) new AA alkaline batteries (see page 7).
PROBLEM: Mode key blinks when you press a key, but home entertainment device does not respond.
SOLUTION: Make sure you are aiming the remote control at your home entertainment device and that you are within 15 feet of the device you are trying to control.
PROBLEM: The remote control does not control home entertainment devices or commands are not performing properly.
SOLUTION: Try all listed codes for the device brand being set up. Make sure all devices can be operated with an infrared remote control.
PROBLEM: TV/VCR Combo does not respond properly.
SOLUTION: Use the VCR codes for your brand. Some combo units may require both a TV code and a VCR code for full operation (see page 10).
continued on next page...
17
