15
RE-ASSIGNING DEVICE KEYS
The URC-1047 Universal Remote Controlcan be set up to
control a second TV,PVR,DVD player,or VCR,or any
combination of up to four home entertainme nt devices.
For example,to have the unitcontrol a TV,a Cable Con-
verter,a nd two VCRs, you will need to re-assign the
unused AUD key to operate the second VCR as follows:
1. On the remote control,press VCRonce.
Then press and hold SETUPuntil the
VCRkey blinks twice, then release SETUP.
2. Enter 9- 9- 2.The VCRkey will blink twice.
3. Press VCR once,then press AUD once. The
AUD key will blink twice.
4. The AUDkey is now ready to be programmed
for your second VCR.See Programming Device
Controlon p age 8.
To re-assign other device keys,repeat steps 1 to 4 and
substitute the key sequence using the following chart:
To Re-Assign Perform Key Sequence
TVas 2nd VCR ke y: TV- SETUP - 9- 9- 2- VCR - TV
TVas 2nd AUD ke y: TV- SETUP - 9- 9- 2- AUD - TV
TVback to TV:TV - SETUP - 9- 9- 2- TV - TV
VCRas 2nd TV ke y: VCR- SETUP - 9- 9- 2- TV - VCR
VCRas 2nd AUD ke y: VCR- SETUP -9-9-2-AUD -VCR
VCRback to VCR:VCR - SETUP -9-9-2-VCR - VCR
AUDas 2nd TV ke y: AUD- SETUP - 9- 9- 2- TV - AUD
AUD
back to
AUD
:
AUD- SETUP -9-9-2- AUD - AUD
Upon completion ofa re-assignment,the selected mode
key will blink twice to confirm your selection.Then you’ll
need to program device control (see Programming Device
Controlon page 8).
Time Warner Houston Manual 11/20/02 3:54 PM Page 15