■ ■ ■ ■
Key Sequence
You can program your ONE FOR ALL 5 to issue a sequence of commands at the press of a button. For example, you may want to turn on your Satellite and TV at the same time then set your TV to programme 5. Any sequence of commands you regularly use can be reduced to one key stroke for your convenience. You can install a sequence on any key, except for the device keys (TV, VCR, SAT, CD and AUX), the Magic key and the Scan key.
To set up the sequence mentioned above on the Blue Fastext key of your ONE FOR ALL 5:
1
2
3
4
5
SAT
TV
Press and hold down the MAGIC key until the red light blinks twice.
Press 995.
Then press the Blue Fastext key. (This is the key to which the sequence will be assigned.)
Next press SAT, POWER, TV, POWER, 05 (Enter the programme number exactly as you would on your original remote.).
To end the sequence, press and hold MAGIC until the ONE FOR ALL 5's red light blinks twice.
Whenever you press the Blue
6 Fastext key, the ONE FOR ALL 5 will turn on your Satellite, turn on your TV then set your TV to programme 5.
To install any sequence, press:
MAGIC* + 995 + Key to which sequence will be assigned +
Sequence of commands + MAGIC*
*Here you must hold down MAGIC until the red light blinks twice.
■ ■ ■ ■
23
