Universal Electronics URC-2505 manual Setting Up Your Video Recorder

■ ■ ■ ■

Setting Up Your Video Recorder

To set up the ONE FOR ALL 5 for your Video Recorder:

1

2

3

4

ONE FOR ALL

Admiral	087 093 264
	163
Agazi	264
AGB	075
Aiko	216 009
Akai	208 351 037

VCR

PLAY

Find your Video Recorder code in the Set-Up Code section (starting on page 30). Codes are listed by brand name. The most popular code is listed first. Switch on your Video Recorder and insert a blank tape.

Press and release the ONE FOR ALL 5’s VCR key, then press and hold down the MAGIC key until the ONE FOR ALL 5’s red light blinks twice.

Enter your three-digit VCR code using the number keys. The red light will blink twice.

Now, aim the ONE FOR ALL 5 at your Video Recorder and then press PLAY. If your Video starts playing the tape, your ONE FOR ALL 5 is ready to run your Video Recorder.

Write your code in the three boxes on page 29, for easy future reference.

To control your Video Recorder, press the VCR key first.

If your Video Recorder does not respond, follow steps 1 through 4 with each code listed for your brand. If none of the codes listed for your brand operate your Video Recorder, then try the search method described on page 13, even if your brand isn’t listed at all. If you change programmes on your Television through your Video Recorder, press VCR and not TV, before you use the programme keys.

■ ■ ■ ■

8