Main Settings Menu
DISPLAY- Press this setting button to adjust the screen and button backlight- ing. The longer your screen is lit, the more frequently you’ll need to charge the
SOUND - Adjust the volume of the sounds your
SYSTEM - These settings are for service use. For diagnostic purposes, an installer can turn off the Pick Up sensor, display remaining battery charge and erase all programming permanently. Some of this menu may have been disabled by your installer as a safety measure.
INFORMATION - Adjust the time, date or you can display the amount of mem- ory available and the version number of the firmware loaded into your
Adjusting the Display
BACKLIGHT - Specify how long the MX- 980 screen should stay lit after you press a button. You can select two different time out settings. One for when it is hand held, another for when it is in the charging base.
BRIGHT - Adjust the brightness of the screen.
BUTTON LIGHT - Turn the backlighting for all buttons on or off. When on, all the buttons backlight so that you can read their labels in total darkness.
Page 8
