
STEP 5: Once the AVEX R6 has learned all the buttons in the selected component mode, press and hold the Component button and SELECT [SEL] but- tons at the same time to save the learned functions. The component LED light will blink three times to confirm the programming. Now test all the buttons to make sure they learned correctly.
Repeat Steps
If the Learning Method does not work, here are a few suggestions:
•If you have a Plasma TV, move to another room
•Avoid programming under fluorescent light or direct sunlight
•Put new batteries in the old remote
•Gradually vary the distance between the two remote controls
•Tap the button on your old remote instead of pressing and holding it during the learning process
Here are some additional facts regarding the Learning process:
• Learned functions override any existing
•Learned functions are automatically erased when a new function is learned on the same button
•Learned functions are retained even after a different
•To return to an original
Page 15