Erasing MacroPower & Other

Macro Commands

STEP 1: To erase MacroPower commands on the POWER ON or SYSTEM OFF button, press and hold either the POWER ON or SYSTEM OFF button and the MUTE button simultaneously for two seconds until the current status component LED turns on.

IMPORTANT: If you don’t proceed to the next step within 30 seconds, the LED will turn off and exit set-up mode and you will need to start over.)

STEP 2: Press the CHANNEL UP button to erase and exit Erase mode. The component LED light will blink three times to confirm the erasure.

POWER

SYSTEM

ON

OFF

CHANNEL

UP

MUTE

NOTE: To erase other Macros, simply press the appropriate button in Step 1 in combination with the MUTE button.

Page 28

Page 28
Image 28
Universal Remote Control R6 manual Erasing MacroPower & Other Macro Commands, Channel Mute