Universal Remote Control Programming Avex R6 using Pre-Programmed Codes, Quick Set-Up Method

Programming AVEX R6 using

Pre-Programmed Codes

There are three ways you can program your AVEX R6 using the component brand codes that are pre- programmed into the remote.

•Quick Set-Up Method

•Three-Digit Code Entry Method

•Auto-Search Method

The Quick Set-Up Method is a unique new feature that enables the fastest and easiest set-up by using one-digit codes for up to 10 major brands for each component. The Three-Digit Code Entry Method allows you to set-up the AVEX R6 using 3-digit codes for component brand names. It is also a fast and easy way to program the remote. The Auto-Search Method scans through all the brands in the remote control, one at a time. It should be used when either the Quick Set-Up or Three-Digit Code Entry Methods

do not work.

* * *

Quick Set-Up Method

STEP 1: Manually or using your old remote, turn on the component you want to program—for example, to program your TV, turn on your TV set.

STEP 2: Point the AVEX R6 toward the component that you want to program (in this case the TV set) and press the component button (in this case the TV button). While keeping the component button pressed, press 1~0, in sequence, using the Number Pad. When the correct number is selected, the remote will send a POWER OFF command and the component will turn off. For example, the Sony Power Code is sent if you press the Number “1” button.

STEP 3: Release the component button to save the code. The component LED light will blink three times to confirm that the code has been stored.

Repeat the above three steps for other components.

COMPONENT

BUTTONS

NUMBER

PAD

Page 9