Advanced
Features
(
Continued
)
C. Assigning Different Device Codes to other Device Buttons
This feature can be used to program the remote control for more than one TV, VCR, Satellite Receiver, etc. The three digit code for any device can be stored in any of the DEVICE buttons. For example: For two VCRs, the first VCR can be stored in the VCR DEVICE button under normal set up procedures, and the second VCR can be programmed into the unused CATV or any other DEVICE button.
Step 1: Turn on the device you wish to operate.
Step 2: On the remote control, press the DEVICE button you wish to assign this device to, and the MUTE button simultaneously.
Note:
SET will appear in the LCD.
Step 3: Press the DEVICE BUTTON that corresponds to the actual device you plan to operate.
Note:
SET will appear in the LCD.
Step 4: Select the three digit code number from the code list found on pp. (15 
30) for the device you will be operating
Step 5: Point the remote toward the device, and press in the three digit code number.
Note:
SET # # # will appear in the LCD.
Step 6: The device will turn off when the correct three digit code number has been selected. Press the DEVICE button selected in Step 2. This will store the three digit code into that DEVICE button.
Note:
PASS will flash in the LCD.
10
