Universal Remote Control Unifier URC-100 owner manual T h e U n i f i e r Learning Method

T h e U n i f i e r

Learning Method

The Unifier can learn commands from your old remote controls one-button-at-a-time by following these simple steps:

1Line-up the Unifier with your old remote control, head-to-head, one or two inches apart.

2Press and hold both the desired DEVICE button and the SELECT button for approximately three seconds. The top of the display will show “LEARN”. You are in LEARN mode now.

Note: You have 30 seconds to perform a step while you are in LEARN mode. If you don’t press a button within that time, the Unifier will time out and return to normal operation.

DEVICE

Buttons

SELECT

Button

8